AME Nano Heater for Dogs – Keep them At Comfortable Body Temperature During Extreme Winter Weather

Below are the summary results of the survey on AME Nano Heater as Warm Dog Vest, People Vest and aftermarket Heated Vest. Not surprisingly the heated people vest was appreciated by most survey respondents.

_________________________________________________________________

Further update on heated wireless vest for dogs. Wireless with rechargeable battery and lining on Phase Change Material to keep dog comfortable always.

Vest designed to reach either of the two preset temperatures from -20C within 2 minutes. Temperature to be set by owner – two temperatures are 35C or 40C.

Designed with fail safe protection as Nano Heater temperature cannot exceed settings per design.

Design HMI and AME working with Salt Flats have started development of Warm Vest for dogs that will keep your pet warm during winter weather. It is a thin flexible vest that can be easily wrapped around the pet with rechargeable battery pack that will keep dog warm for 2 hours at a time. Battery can be recharged before your pets next foray into cold winter weather.

Film’s information:

Target is to design the controller in the heater mat to match ideal body temperature of pet in under 2 minutes, so pet is comfortable in winter weather when outside.

As the vest is very thin you can still cover your dog with decorative vest, if you want.

  • Heater film sample size: 300mm x 180mm
  • Track length: 168mm
  • Power: 15W
  • Average power density: 298.619 W/m2
  • Track power density: 1200 W/m2
  • Sheet resistance: 0.7381
  • Temperature increase: 25℃ to 55 ℃ (5 min)

With proper support target is to have design and validation completed in the next 6 months to hopefully have it ready for market before Jan 2019.

For more information contact designhmi@gmail.com.

 

Share →

One Response to Heated Vest for Pets / Dogs

  1. Jay Adams says:

    Doting animal lovers will rejoice. What is your target resale? MOQ?

Leave a Reply

Your email address will not be published. Required fields are marked *